If you’re running Windows on your personal computer and you’re aware of the fact that Windows is updated regularly, however very few people are aware of the reason behind this. I’ve seen a lot of people seeking answers to questions such as WHAT is Windows Modules Installer (TiWorker.exe) and what is its purpose of it?
Windows Modules Installer is nothing more than a method connected to windows updates. It’s a process in the system that lets you automate the installation and modification and updating of windows updates. If your computer runs that is bug-free, it’s due to the Windows Modules Installer Worker that automatically updates windows to ensure that it’s completely bug-free.
What is the Windows Modules Installer Worker, or Tiworker.exe?
Windows Module installer worker is software that monitors the windows updates automatically on the PC. This program is crucial to allow windows to be able to check for updates automatically when you boot your computer or laptop since this tool is running automatically it checks for any updates to the windows.
However, due to the issues that the device has at times, it may cause problems and reveal the excessive utilization of CPU on the task monitor, as well through a software called”the Windows Module Installer Worker or Tiworker.exe Windows module installer, and you may also experience some slowdown in the performance of your system in general within your PC as a result of this.
Could it be malware or a virus?
It’s not a virus or malware It is merely an element of Windows that can be used to update. Therefore, you do not have to be concerned about this. If you’re concerned about the issue and want to run one of the malware scans using windows defender or one of your favorite antivirus and malware scans with Malwarebytes.
There is also an antivirus that is specifically designed for you, such as Bitdefender. It will shield against any possible dangers. For the most affordable prices, look to see if there are Bitdefender Total Security coupons.
How do you solve your Windows Modules Installer Workinger problem with the aid of a significant quantity of CPU power?
There are several solutions and solutions to this problem, and they are listed below:
Answer 1. You can turn off Automatic Windows updates on your system.
This program is running every time windows is checking for any of the updates on your computer. Thus, disabling Windows updates on a regular basis can fix this problem. To deactivate the automatic Windows updates, take these steps:
- To access”Run” “Run” by pressing the Windows key and pressing R on your computer.
- After that, type services. MSC and then click on”OK.
- You can then search for “Windows Module Installer.”
- Double-click on “Windows Module Installer” and select the manual option in the menu. The default is typically set to Auto or perhaps work.
- Find and double-click to open the “Windows Update” Windows upgrade option.
- A dialog will then appear where you can choose to make the startup type manually or disable, whichever option you choose depending on your preferences.
- Then, click OK.
- After that, reboot your system and everything will be working fine.
This technique is generally effective to solve this problem. If this method doesn’t work you can try the alternative method that is listed below.
Solution 2. Run the Windows update troubleshooter
If you run the Windows update troubleshooter, it is possible to fix this issue in the event that tiworker.exe is having issues. How to do it:
- First, open the settings of your computer Then update and security > troubleshoot Windows update for your system.
- After that, click Run the troubleshooter.
- You can then fix any problems suggested by the Windows Troubleshooter.
Solution 3: Set your Internet to connect using an unmetered connection
The majority of people would suggest this because it will not permit the system to take over a lot from the consumption of the internet by the Windows Module Installer worker, which means there is a good chance that it will not use the resources that are high-performance for the CPU.
- It is possible to do this by simply going to the Start screen > Settings > Network and internet > WiFi.
- Then, click on the Advanced button choices.
- In the final step, choose the metered connection to “On.”
- If you’re using an Ethernet connection, it is best to make the updates by setting the help of a manual.
What is the reason Windows Modules Installer loads Your system’s CPU?
A large amount of Central Processing Unit load is often due to the continual checking for updates from Windows Modules Installer Worker. Windows Modules Installer Worker. Windows OS plays a major role that allows upgrades to be scheduled to be installed at the evening. However, in some instances, the system was turned off at night, and the only way to fix this is to download and install updates in the morning or when you work.
You could even ask what’s the difference in the time at which you download these updates for Windows. Could it be the most demanding workload for your CPU? Yes, it might. In certain situations where you live in a different area of the globe and the server for Microsoft operating in another local timezone, it could change your local timezone with the windows date and time settings which will then allow you to be able to upgrade when the resources are not left. This is why it is possible that the Windows Modules Installation Worker could even be stuck in a loop, searching for the sole source to download.
In uncommon cases, it’s the fact is TikWorker.exe can be extremely heavy on the drivees, CPU, or RAM in the normal actions that are part of Windows Modulators Installer. Additionally, this occurs when you use a manual or automatic method to seek out updates for Microsoft’s Windows 10 or install them. Most of the time this happens when you repair the laptop or computer. Another concern is: how long will there be intense activity in the procedure?
In this case, the best option is to let the installer finish the point it is finished takes, which may require a considerable amount of time on PCs that have slower RAM or hard drives as well as when updates haven’t been downloaded and tested for a longer period of time.
If you notice an issue with the TiWorker.exe process that results in an increase in load between 80 and 100 percent for up to two hours or more, firstly attempt to restart your laptop or computer. Allow the system to restart easily and then sit for five minutes to observe the performance of all processes. In some instances following a reboot, the operation or action of the Windows installer is drastically decreased.
Check Disk Drive Errors
Sometimes, disk drive issues cause excessive use of disks, and the system then becomes inactive, the CPU or disk always uses 99% of the time, and so on. Windows offer a highly efficient and highly active CHKDSK command line tool that aids in checking for errors in the disk drive. In addition, by adding the additional foundations or parameters it is possible to get CHKDSK to find and correct errors on the disk drive. Also, ensure that the bad sectors and disk drive errors aren’t causing this use of disks.
Open your prompt for command prompt(cmd) in administrator mode. Type the command CHKDSK C:/F/R/X, and then click the Enter key. When you are asked the check the scheduled disk at the time of the next restart, press the Y key and restart Windows.
If the drive is damaged, by the CHKDSK tool, attempt to fix them. After the scan is complete and the repair procedure, windows will start to reboot immediately, and then ensure that there are no more Disk utilization issues and the system will run smoothly.
Run DISM Command
System file checker’s results Windows Resource Protection Found Corrupt Files but was unable to repair the problem. It means that there is no program that is unable to fix damage to the system file. That cause you need to run the DISM command DISM/Online/Cleanup-image/RestoreHealth which even helps to improve the system Image and Enables the SFC to do its job.
Following the successful execution of the command DISM, execute the SFC/Scan Now command to fix the files in the system that were missing. After restart of the windows for a new start. Make sure that there’s no increase in the utilization of the disk, or that the CPU is 100% full.
Here are a few of the best solutions to resolve the windows module installer TiWorker.exe High Disk utilization 100% CPU usage issue on Windows 10 PC.
1. Why should you disable the Windows Modules Installer Worker to disable?
If you’re concerned that your system is slower, or that the CPU is taking on a lot of loads, it’s likely due to the windows module worker installer. It performs the required windows updates regularly, and as a result, it places excessive demands on CPU. If you’re an individual who utilizes computers to multitask and multitasking, it’s going to be difficult to accomplish this because TiWorker.exe is your enemy and will slow your system.
It is always possible to check in the task manager and see how you can see how much TiWorker.exe is putting strain on your CPU. If it’s causing a lot of load that it is recommended to shut it down because if it is not disabled it may cause additional technical issues as well.
2. How do I stop the Windows Modul Installer from working in Windows 10
If your PC runs using Windows 10, then there’s an extremely high chance that windows module installer causes a number of issues on your PC. It’s not advised to stop the windows module Installer for Windows 10 because if you do this, you’ll need to update your windows manually.
If your computer is becoming slow, which can be very annoying, it’s recommended to turn off Microsoft’s Windows 10 module installer. And here’s how to accomplish that.
Then follow these steps to deactivate the windows module installer in your computer.
- Press Ctrl+Shift+Esc and go to the Task Manager
- Then, look for Windows Module Installer Workinger (TiWorker.exe) in the list of process names.
- Click on it, then right-click and, in the menu that appears select the option to end Task.
This is however an interim solution since once rebooting your computer after rebooting, the windows module installer will begin over again. However, if you wish to remove it permanently and properly, then you’ll have to make certain changes to the startup settings, which you can accomplish with these simple steps.
- First, open the Task Manager on your system. Then, go to Services
- On the right side, click the Open Services option
- Locate Windows Modules Installer Worker within the list, then click on it with a right-click and select its Properties.
- In the Startup field, select the type field and then choose to disable and then click OK.
How do I enable Windows Module Installer?
If you’re trying to restore your computer to the original version, or you’re unsure about how to start Microsoft Windows Module Installer then follow these steps:
- Go to the Task Manager > Services
- At the end, click on the Open Services Button
- Look for the Windows Modules Installer Worker on that listing, and then click right it and navigate to its properties.
- In the Startup type field, select the Automatic option, and then click OK.
How To Identify Windows Modules Installer Issues
If your system’s Windows Installer is disabled, damaged, or installed improperly this could cause problems with installation. Help your business telephone equipment and software applications run more efficiently by identifying any issues that are causing problems with the Windows modules installed.
The following techniques determine Windows Installer issues that are possible to cause problems when installing, uninstalling, or even updating software.
1. Determine Malfunctioning Windows Installer Engine
Here’s how:
- Click the Start window icon, and then type in “cmd” into the Search box. To run the command for Windows XP and Windows Server 2003 You can select “Run” before typing ‘cmd’ into the dialog box.
- Start the Command Prompt window by pressing the ‘Enter’ key.’
- In the MSIExec command prompt, after that press ‘Enter.’
There will be no error messages if the MSI engine is operating in good shape. If you ever encounter the error code, just input the text from the error message in an online search engine to locate ways to fix the MSI problem.
- Install the program, or uninstall it again.
2. Make Sure You Enable The Status Of Windows Installer Service
Here’s how to determine the status of the Windows Installer service.
- Click the Start window icon and enter ‘services.MSC into the Search box. To run the program on Windows XP and Windows Server 2003 You can also select ‘Run’ and search for ‘services. MSC” in the dialogue.
- In the ‘Services’ tab, press the ‘Enter’ button.’
- Right-click on the Windows Installer, and then select Properties..
- Make the change to manual In the event that it is the Startup type box says ‘Disabled.’
- Close the window ‘Properties’ by clicking “OK.’
- Right-click on the Windows Installer service, and then press Start. The service should begin without error.
- Try using the Windows installer service, or uninstall it again.
3. Check The Windows Installer Version
If your version is out of date it is possible to change the Windows Installer Version to the latest version. It is applicable only to Windows Server 2003, Windows Vista, Windows Server 2003 R2, Windows XP, and Windows Server 2008 only.
4. Re-register The Windows Installer Engine
This method is only available only to Windows XP and Windows Server 2000. Here’s how:
- Click on ‘Start’ then select ‘Run.’
- Then type ‘cmd'” and then press the “Command Prompt.’
- Enter MSIExec /unregister or MSIExec /unregister, and then hit Enter following each line:
- Try installing the Windows Installer, or uninstall and install it again.
Conclusion
This is the complete method of how to disable the Windows Modules installer on your PC. We suggest you disable it only if you notice it’s slowing your PC down, and if it’s not, you shouldn’t remove it. Because the windows module installer protects your data and protects your PC from viruses that can damage your entire system. Even after you disable the Windows Modules Installer Worker ensure that you check for the windows updates manually in order to ensure that your computer is in good working order.
